Unication Alpha Legend Programmer

The Unication Alpha Legend Pager Programmer includes programming software, a fixture or nest, a DB9 serial cable, and a 5 VDC 1A power adapter. The programming fixture is the same device used by all Unication alphanumeric pagers, so it can be used to program Alpha Elegant, Alpha Elegant Dual, Alpha Elite, Alpha Legend Dual, and Alpha Legend Plus pagers as well. The programming software is written for POCSAG based Unication alphanumeric pagers, so it is also compatible with the previously mentioned pagers, the exception being the FLEX based Alpha Elite pager.
Manufacturer: Unication

The programmer is setup by connecting the serial cable to the programming fixture and the desired COM port of the computer.  Add power with the adapter.  To program or read an Alpha Legend pager, the pager must have a battery installed, the pager powered on and positioned in the programming fixture so the two programming pins fit through the holes in the pager near the battery lock latch.  Lowering the locking arm of the fixture and snapping it into place will secure the pager while using the programmer.  Install, configure and run the programming software application.

The programmer is setup by connecting the serial cable to the programming fixture and the desired COM port of the computer.  Add power with the adapter.  To program or read an Alpha Legend pager, the pager must have a battery installed, the pager powered on and positioned in the programming fixture so the two programming pins fit through the holes in the pager near the battery lock latch.  Lowering the locking arm of the fixture and snapping it into place will secure the pager while using the programmer.  Install, configure and run the programming software application.