USAlert WatchDog Programmer

The USAlert WatchDog Pager Programmer consists of a programming fixture, a serial cable, a USB cable, a USB-to-Serial Adapter, driver software for the USB-to-Serial Adapter, and WatchDog programming software. There are currently two versions of the programming software, one for older WatchDog Pager firmware versions and one for newer versions of the WatchDog Pager firmware. A WatchDog Pager with version 5.16 firmware and later uses the latest WatchDog Pager Programmer software. The USAlert WatchDog LT Pager also uses the same programming hardware and the latest Programmer software.

Manufacturer: USAlert

The WatchDog Programmer can be setup with either the serial cable or a combination of serial cable, USB cable, and USB-to-Serial Adapter. Setup the Programmer using the serial cable by connecting it to an available COM port on the computer and also to the serial connection on the programming fixture. To setup using the USB cable, connect it to an available USB port on the computer and also into the USB-to-Serial Adapter. Then connect the serial cable to the other side of the USB-to-Serial Adapter and also to the serial connection on the programming fixture. Driver software for the USB-to-Serial Adapter must be installed. Check the USAlert WatchDog Programming Manual for in-depth programming setup information as well as detailed descriptions of WatchDog Pager programming options.

Overview
Prog. Software
Documents

WatchDog Programming Software *(firmware version 5.16 and later)

Software Version	VU6A
Date Published	24 Jan 2018
File Size	0.9 MB

*Check the firmware version by first turning the pager off. Hold down the top button (Reset Button) and turn the pager on. Caution: the pager is very loud. The firmware version will be the first display. Return to normal operation by turning the pager off and then back on.

WatchDog Programming Software *(firmware version 5.08 and earlier)

Software Version	V02S
Date Published	15 Dec 2011
File Size	0.6 MB

USB-to-Serial Converter Driver

Software Version	V110
Date Published	29 Dec 2009
File Size	2.3 MB

**Microsoft .NET Framework 2.0

Software Version	V2.0
Date Published	7 Nov 2005
File Size	22.3 MB

**If running Windows 8, .NET Framework 2.0 is included. Enable the file by going to Control Panel, Programs and Features, Turn windows features on or off, and checking the box for .NET Framework 3.5 (includes.NET 2.0 and 3.0).

Product Files

WatchDog Programming Manual

USAlert WatchDog Programmer

USAlert WatchDog Voice Pager

Follow us